DT Swiss RR21 Dicut Wheelset (2024)

Tipping the road.cc scales of truth at just 1415g, the DT Swiss RR21 Dicut wheels certainly excel when the terrain points skywards, but they aren't just for the weight weenie climbers. With an excellent build quality, top notch components and impressive stiffness they are great all-rounders. A solid performance investment for your lightweight bike.

Acceleration is amazing, especially from a standing start, thanks to the low overall weight of the shallow alloy rims being easy to turn over. Once momentum is gained the RR21s just continue to accelerate smoothly and rapidly, up until your legs fill up with lactic.

> Find your nearest dealer here

This level of speed gain makes them great for riding in a group as, should there be a break, you can be on it within seconds without feeling like you've wasted any energy anywhere. The instant pawl engagement of the rear hub is something that really stands out.

Climbing, as you'd expect, is where the RR21s excel, even if you're not exactly a mountain goat yourself. On really short, sharp climbs where I kept the power down out of the saddle I could get a small amount of brake pad rub, but for 99 per cent of the time they feel very stiff indeed.

When coming back down the hill, the braking feels controlled and consistent thanks to the smooth machined rim surface. They don't come with any specific brake pads but the Swiss Stop Yellows I was running certainly seemed a great combination wet or dry.

Shallow rims also mean the RR21s aren't harsh; they're stiff, yes, but they offer a smooth ride over the rough stuff.

What's Dicut?

The whole Dicut thing came about in DT Swiss's range a few years ago. The company takes its own products and tweaks them for performance and aerodynamics – a tuning department, if you like.

The most notable area is the hubs. Both the front and rear are based on DT's very impressive 240s models but with the distance between the flange maximised, which, according to DT, is "thanks to the high precision covers which integrate the rotor seal".

In theory, a wider flange increases side-to-side stiffness. I could get some brake pad rub if I really stamped hard on the pedals but overall the RR21s are impressively stiff.

The hubs are paired with DT's own Aerolite bladed spokes which are straight pull and 'nail head' –which means once they are sat in position at the hub they can't twist either when the wheels are in use or being trued, so the very, very minimal aero gains aren't compromised. Being straight pull means they exit the hub, well, straight – no bend – which again should see a little more stiffness.

The 20 radially laced spokes of the front wheel are then attached to the rim using DT Pro Lock aluminium nipples. Corrosion can sometimes be an issue with alloy nipples, but these probably aren't the type of wheels you're going to be crashing about on during the winter months.

The rear uses the same setup but its 24-spoke layout is one-cross, with the drive-side spokes swapped for DT Aero Comps for a little extra robustness. The rear rim is also drilled asymmetrically (offset) towards the non-drive side to reduce the amount of dishing caused by an 11-speed drivetrain, again making the wheel a bit stronger.

Rim width isn't overly wide by current standards at 22mm externally (18mm internally) so those of you who like to ride wider tyres may end up with a slightly more bulbous tyre profile than you'd like. Me, I was happy with the way a set of 23mm Pro-Lite Rutas fitted, with a pretty smooth transition between tyre and rim. Fitting was a doddle too, as was sticking some 25mm Michelin Pro 4s on, although some tyres are a little trickier so you'll need to find the right combination.

The RR21s are tubeless-ready out of the box if that's a route you want to go down, and tubeless valves are included, as is a washer so that the freehub can take 8, 9 and 10-speed cassettes.

> Want to upgrade your wheels? Check out our guide

So to price: £649.98 is a lot of money to be laying down on a set of wheels, especially at a price where a lot of people would be looking towards carbon fibre. The only place the RR21s lose out slightly is in aerodynamics, because of their shallow rim; this was particularly noticeable to me as I'd been running the 40mm-deep Cosine carbons on the bike before. The DT Swisses felt slower on the flat, but in real terms it was minimal unless you're spending all day riding up and down flat dual carriageways. All a bit of moot point really, because if ultimate speed on the flat is your only concern you won't be looking at the RR21s anyway.

The price reflects the whole package, though. The build quality is exceptional and you can really feel the mechanics of the freehub body working as it engages and snaps into place under hard efforts. If you want a silent freewheel you're best off looking elsewhere, though, because the DT one is a little on the 'clicky' side...

The strength and stiffness from such a lightweight set of wheels is also impressive, especially considering the 110kg maximum rider weight limit. I also like the fact that they aren't overly flashy – well, apart from the bling machined hub flanges.

Overall, I think these are a great long-term investment, which will really transformthe speed and acceleration of your bike.

Verdict

With their impressive build quality and light weight, the RR21s are fast all-rounders