MECHANISMS & MECHANICAL DEVICES SOURCEBOOK Third Edition (2024)

MECHANISMS & MECHANICAL DEVICES SOURCEBOOK Third Edition NEIL SCLATER NICHOLAS P. CHIRONIS McGraw-Hill New York • Chicago • San Francisco • Lisbon • London • Madrid Mexico City • Milan • New Delhi • San Juan • Seoul Singapore • Sydney • Toronto

Library of Congress Cataloging-in-Publication Data Sclater, Neil. Mechanisms and mechanical devices sourcebook / Neil Sclater, Nicholas P. Chironis.— 3rd ed. p. cm. Rev. ed of: Mechanisms & mechanical devices sourcebook / [edited by] Nicholas P. Chironis, Neil Sclater. 2nd ed. 1996. ISBN 0-07-136169-3 1. Mechanical movements. I. Chironis, Nicholas P. II. Mechanisms & mechanical devices sourcebook. III. Title. TJ181.S28 2001 621.8—dc21 2001030297 Copyright © 2001, 1996, 1991 by The McGraw-Hill Companies, Inc. All rights reserved, Printed in the United States of America. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or distrib- uted in any form or by any means, or stored in a data base or retrieval system, without the prior written permission of the publisher. 1234567890 KGP/KGP 07654321 ISBN 0-07-136169-3 The sponsoring editor for this book was Larry S. Hager and the production supervisor was Pamela A. Pelton. It was set in Times Roman by TopDesk Publishers’Group. Printed and bound by Quebecor/Kingsport. McGraw-Hill books are available at special quantity discounts to use as premiums and sales promotions, or for use in corporate training programs. For more information, please write to the Director of Special Sales, Professional Publishing, McGraw-Hill, Two Penn Plaza, New York, NY 10121-2298. Or contact your local bookstore. This book is printed on acid-free paper. Information contained in this work has been obtained by The McGraw-Hill Companies, Inc. (“McGraw-Hill”) from sources believed to be reliable. However, neither McGraw-Hil1 nor its authors guarantee the accuracy or completeness of any information published herein and neither McGraw-Hill nor its authors shall be responsible for any errors, omissions, or damages arising out of use of this informa- tion. This work is published with the understanding that McGraw-Hill and its authors are supplying information but are not attempting to render engineering or other professional services. If such services are required, the assistance of an appro- priate professional should be sought.

Keep reading this paper — and 50 million others — with a free Academia account

Used by leading Academics

Michele Brun

University of Cagliari

Chandramouli Padmanabhan

IIT Madras

Mahmoud Farag

American University in Cairo

Isad Saric

University of Sarajevo

Related Papers

Design, Analysis, and Implementation of a Four-DoF Chair Motion Mechanism

IEEE Access

Ming-Yen Wei

Download

On the Kinematics of Three-Link Spatial Cam Mechanisms

Ahmad Ramahi

Download

Shifted axis angular positioning mechanisms – unconventional use of exact constraint design

MATEC Web of Conferences

Ksawery Szykiedans

Download

Parallel spherical mechanism with two degrees of freedom

Vincenzo Parenti-castelli

Download

Three Degree of FreedomDelta Robot, Design, Control, and Implementation for Educational Purposes

Library for Science AND Technology. (FREE ARCTICLE FOR SCIENCE)

Computer control labsat Palestine Polytechnic university consists of different control plants including 3DOF linear systems, also single, and double inverted pendulums. For the educational need of applying control techniques on parallel robots; Delta robot is to be implemented. A 3DOF Delta robot is implemented to provide 3 translational motions in í µí±¥í µí±¦í µí± § directions. The design itself is considered to fit well in lab environment and support future educational use. Different design issues are also tackled including choosing the right dimensions of connecting links, end effecter, and robots upper plate and choosing the appropriate joints. Independent joint control technique was used to move end effector to a desired position. Robot is first modeled through SOLIDWORKS computer aided design software. Further, Different analysis are done including design, and workspace analysis. Delta robot is then provided with different interacting elements including keypad, LCD display, and computer GUI; so students can interact easily with the robot. Design elements are made available openly for students to reach and work through so they can understand, interact, and apply knowledge and techniques on the robot.

Download

Design of a High-Speed Spherical Four-Bar Mechanism for Use in a Motion Common in Assembly Processes

Volume 8: 31st Mechanisms and Robotics Conference, Parts A and B, 2007

Andrew Murray

In this paper, we present the mechanical design of a spherical four-bar mechanism for performing a motion common in manufacturing and assembly processes. The mechanism is designed to create, in a single, smooth motion, the combined rotation of a body by 90 degrees about one axis with a 90 degree rotation about an axis perpendicular to the first. A spherical four-bar mechanism is pursued as the basis for the design because the reorientation is produced mechanically rather than via a control scheme typical when higher degree of freedom systems are utilized. The design initiates with the kinematic synthesis of the spherical mechanism to guide a body through two orientations. The next step in the design is to refine the spherical fourbar based on manufacturing and operational concerns. As one of the challenges of utilizing these four-bars is tuning the starting and ending angle for the mechanism’s motion, a sensitivity analysis is performed to gauge the needed accuracy. Finally, there a...

Download

Error Analysis of a System for Measuring Three-Dimensional Joint Motion

Journal of Biomechanical Engineering-transactions of The Asme, 1983

Mohamed Hefzy

Download

A general method for the determination of the instantaneous screw axes of one-degree-of-freedom spatial mechanisms

Mechanical Sciences

Juan Ignacio Rodríguez Rodríguez

Download

Development and Testing of a High-Precision Position and Attitude Measuring System for a Space Mechanism

Gabriel Paciotti

This paper describes a high-precision optical metrology system - a unique ground test equipment which was designed and implemented for simultaneous precise contactless measurements of 6 degrees-of-freedom (3 translational + 3 rotational) of a space mechanism end-effector [1] in a thermally controlled ISO 5 clean environment. The developed contactless method reconstructs both position and attitude of the specimen from three cross-sections measured by 2D distance sensors [2]. The cleanliness is preserved by the hermetic test chamber filled with high purity nitrogen. The specimen's temperature is controlled by the thermostat [7]. The developed method excludes errors caused by the thermal deformations and manufacturing inaccuracies of the test jig. Tests and simulations show that the measurement accuracy of an object absolute position is of 20 micron in in-plane measurement (XY) and about 50 micron out of plane (Z). The typical absolute attitude is determined with an accuracy better...

Download

Design high precision and fast dynamic controller for multi-degrees of freedom actuator for Experimental Research and Education Investor: Iranian Institute of Advance Science and Technology (2013-continue)

Alireza Siahbazi, Hamid Cheraghi, Mahsa Piltan, Mojtaba Yaghoot, Hootan Ghiasi, Hossein Davarpanah

Download

A Complete Kinematic and Dynamic Model for Spherical Actuation of the Atlas Motion Platform

M. John D. Hayes

Download

Fundamentals of Robotics Chapter Topics 2.1 Parts of a Robot 2.2 Degrees of Freedom 2.3 Classifying Robots

Batista Cena

Download

Kinematic modeling of a 5-DOF parallel mechanism for semi-spherical workspace

Mechanism and Machine Theory, 2009

Benjamin Maurin

Download

Switching from Flat to Spatial Motion to 3R Mechatronic Systems

Journal of Mechatronics and Robotics

Antonio Apicella

Download

Some Aspects of the Structure of Planar Mechanisms

American Journal of Engineering and Applied Sciences

Antonio Apicella

Download

Parallel Mechanisms and Robots

Springer Handbook of Robotics, 2008

Clément Gosselin

Download

Analysis of the degrees-of-freedom of spatial parallel manipulators in regular and singular configurations

Mechanism and Machine Theory, 2013

Ash*tava Ghosal, Arun Srivatsan

Download

An Opto-Mechatronic Device for Direct Measurement of Three Degrees-of-Freedom Orientation

IFAC Proceedings Volumes, 1993

gabi meyouhas

Download

Influence of Motion Error of Translational and Rotary Axes onto Machined Surface Generated by Simultaneous Five-axis Motion

Procedia CIRP, 2014

Antonio Scippa

Download

Generalized mathematical modelling of a novel singularity-free class of six degrees of freedom motion platform

Abraham Weiss

Download

MECHANISMS & MECHANICAL DEVICES SOURCEBOOK Third Edition (2024)

References